Single Room Energy Recovery Ventilator
Features:
- Elegant decorative front panel
- Automatic shutter to prevent backdraft
- Frost and condensation-free operation
- One-stop installation with a single hole through the internal wall
- High thermal efficiency with a built-in ceramic energy regenerator (97% heat recovery efficiency)
- Reversible 3-speed EC duct fan with low power consumption (7.8W)
- Free-cooling mode for efficient operation when the outdoor temperature is near the set temperature
- Standard prefilter and F7 (MERV11) filter for clean air
- Flexible operation can work individually or in pairs
- High ingress protection with an IPX4 rating
- Quiet operation, less than 32.7dB(A)
- Easy control via buttons, remote controller, and WIFI (Smart APP)
- Smartphone control via Android or iOS from anywhere in the world
- Smarter IAQ control with a standard CO2 sensor for real-time concentration display and fresh air control
- Optional humidity sensor and IAQ detector for enhanced indoor air quality management.
Unit Size
Ceramic Energy Regenerator
- High-tech ceramic energy accumulator with 97% regeneration efficiency
- Recovers heat from exhaust air to heat or cool supply air
- Unique regenerator design with large air contact surface and excellent heat-conducting properties
- Treated with antibacterial composition to prevent bacterial growth inside.
Air Filtration
- Standard filtration includes two integrated air pre-filters and an F7 air filter.
- These filters prevent dust, insects, and contaminants from entering the supply and extract air.
- Antibacterial treatment is applied to the filters.
- Filters can be cleaned using a vacuum cleaner or flushed with water, with the antibacterial treatment remaining intact.
Energy Saving
Cool Outside
- Reversible operation with energy regeneration or supply/exhaust mode.
- Heat recovery mode saves over 30% energy compared to regular exhaust fans.
- Achieves 97% heat recovery efficiency when air enters the heat regenerator.
- Reduces the load on the heating system in winter by recovering energy.
Hot Outside
- Heat recovery mode with two cycles.
- Two units alternate intake/exhaust to achieve balanced ventilation.
- Enhances indoor comfort and increases ventilation effectiveness.
- Recovers heat and humidity during ventilation, reducing the load on the cooling system in summer.
Contact us
We are on hand to help with every and all of your quality air requirements
Office@climacomfort.com.au
General Inquiries: 07 4028 3000
Sales: 0435 130 913
Service: 0415 200 268
Thank You, we'll be in touch soon.